Overview of RADIUS failover server

One of the methods used to authorize Internet services in Splynx is the RADIUS protocol. More details about the Splynx R...

How to configure NetFlow accounting in Splynx

Learn how to configure NetFlow accounting to to bring usage data into Splynx.

Hotspot add-on in Splynx 4.0

The Hotspot add-on was built to help businesses from low-income communities grow and earn more.

Juniper Radius configuration with variables

This article is the second part of the Juniper MX Radius configuration tutorial.

How to configure Radius Juniper MX

Juniper Networks is one of the leading vendors producing networking equipment. Together with Cisco, Juniper defines wher...

How to configure Mikrotik IPv6

This blog post describes how to configure the Mikrotik router to act as a PPPoE server with IPv6 enabled.

How to configure Cisco IOS XR Radius (ASR 9000 series)

We've implemented PPPoE Radius authentication on Cisco one of the most powerful BRASes ASR 9000, that runs the IOS XR op...

How to configure Juniper Radius server (updated)

This is an updated version of the Radius server configuration with Juniper using variables for speed limitations.

How to configure Huawei NE (NetEngine) router Radius

We'll tackle the configuration of the Huawei NE20 and Huawei NE40 router with the Radius server. We will be using Splynx...

IPv6 CPE and home routers support

This article shows examples of 3 different CPEs from 3 other vendors. We have selected IPv6 routers that are used in net...